This proven design has been successful in ID/OD grinding in the bearing, aerospace, and power generation industries. The 1000 ID/OD cylindrical grinder is a highly rigid platform configured to machine a part with its axis vertical, which eliminates the need for a steadyrest or tailstock, enhancing accuracy and repeatability. The ID/OD grinding machine is available with up to six axes of motion and various options, including hard turning to improve productivity. An optional tool changer reduces the need to re-clamp the part for multiple operations thus reducing machining time.
Dimensions:2.7M x 2.8M
Axes: X, Z, B, C
Spindle:15HP & 1500 to 7500 RPM
Fanuc CNC control
Precision roller ways in all axes
X and Z Axes Linear Motor Technology
Ability to use any abrasive
OD/ID grinding spindle
Single point dresser
Roller style table bearing
Linear glass scales in all axes
Full machine enclosure
NOTE: The C-axis contouring rotary work table is not a standard feature but can be purchased as an option.
Hover over an option to view a description.
High speed C-axis (rotary table)Faster rotary tables can be quoted for specific applications.
Disk dresserThis option allows for dressing the wheel straight and interpolating a form into the grinding wheel.
Roll form dresserA formed dressing roll allows for the final part form to be dressed into the wheel allowing shorter cycle times.
Wheel balance systemA wheel balancer is necessary when tight tolerances on surface finishes are required. Also, to extend wheel life.
Part probeA part probe can be permanently mounted to the B-Axis for faster inspections of components.
Spindle power up to 100HP and various RPM options.
Tool probeChecks the grinding wheel prior to the actual grind process to ensure accuracy.
Milling and drillingMilling and Drilling options are available to add auxiliary machining to the Campbell center.
Gap eliminatorGap elimination allows for the wheel to touch the part in a higher feed rate and then reduce to a feed rate for the specific grind.
Tool and nozzle changerA tool changer is the most requested option. Storing multiple tools allows for many operations to be handled with a single clamping. Tool changers have been supplied with 40+ positions and can change the grinding wheel, Roll dresser, Turning tool, Milling tool, Drilling tool and coolant nozzle for each cycle.
Spindle mounted dresser with optional dress roll changer
Mist collectorA mist-free zone is required in many applications. Our mist collectors are sized specifically for the enclosure of each machine.
Coolant through the toolCoolant through-the-spindle can be quoted for specific drilling/milling applications.
Fire suppression system (for oil coolant)Certain applications require machining in oil. The spark risk is controlled through a fire suppression system. This includes a rapid deployment of the system once heat is detected and blast doors to force the remaining heat upwards and away from the operator. This creates a safe environment to operate in oil under extreme circumstances.